How To Enter Unlock Codes!!

How to enter my Unlock Code on BlackBerry?

Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM
card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how
many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked


WIPE
/
RESET
1.Go to Options
2. Select Security Options
3. Select General Settings
4. Press the button located left of the trackball
5. Select Wipe Handheld



Solution
for mep code (0 left)
This is the solution for anyone have mep code 0 left in his handset that no
attemt balance for enter code.
1.please install black berry desktop manager. (its free download from black
berry website)
2.connect handset with pc.
3.open this software its shows booting rom and ask u phone unlock code(note:
its not asking mep code just user code).if not phone code inserted then it
update rom automatically.
4.now your handset reboot,
then you got mep code(10 left) in network lock section.
thank u.


http://gsmhosting.net/vbb/attachment.php?attachmentid=151080&d=1209540979

-----------------------




How to enter my Unlock Code on Palmone Treo?

Model : Treo 600

1 - Switch ON your phone with Allowed SIM Card,
2 - Go to Menu and select "Phone Tool" or "Phone
Application"
3 - Type on Virtual Keyboard *#*#CODE#
4 - Select with PEN "Number" and phone will show that's unlocked now
!

or

1 - Switch ON your phone with a not Allowed SIM Card,
2 - Enter the Unlock Code we sent to you.

Model : Treo 650/680/Centro

First of all you need orignal oprator sim or
master sim ( Phone's radio must be on and "sim
card not valid" not shown on the phone ).

this step is impartent


and now enter the code

1) Insert SIM card and power up phone by holding down the RED button on the
right side of
the phone
2) Tap the GREEN button on the left side of the phone
3) Type in *#*# then the specific 8 numbers they provide and type # to end
4) Push the GREEN button again and you should get a message saying the phone is
now
unlocked


If you do not have a SIM card inserted or you have inserted an invalid SIM card,
you will
get the message that the SIM card was not found, and the phone will not accept
your unlock
code until you insert a valid SIM card.

Ensure you enter the codes in this manner *#*#CODE# (e.g. *#*#12345678#)

For hard reset you can do like this video > ( https://www.youtube.com/watch?v=a1pYWwe0Nkg
)

1. Power phone off.
2. Remove the battery cover.
3. Press and hold the Power key on the keypad.
4. While holding the Power key, insert the stylus in the reset hole on the back
of the
device.
5. Two logos will appear during the reset.
6. Release the Power key when the "Palm Powered" logo (second logo) appears.
7. A warning message will appear: "Erase all data?"
8. Press Up arrow key to complete the hard reset.
* Press any other key to cancel the reset.


Troubleshooting:

Error Message: "The SIM Lock has NOT been removed from this phone"

Solution 1: Please make sure you are entering the correct code and enter it
using this method *#*#CODE# dial

Solution 2: If the phone says that the SIM lock has not been removed, ensure
that the phone radio (wireless mode) is on.


Keep pressed red button to
enable radio on phone. After type code like *#*#CODE# and call.



Model : Treo 750

1 - Power on handset With Non accepted Sim card
2 - Enter the unlock code
3 - Your phone will be unlocked.

Note = If you get invalid code, Soft reset the device and make sure battery is
fully charge, and try above procedure again.

------------

How to
enter my Unlock Code on Alcatel?

Model : Method Generic

1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.

Model : 531 & 535

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select
"YES",
4 - Enter the Code we send to you.

Model : All other Alcatel

1 - Switch on your phone with a not allowed SIM
Card,
2 - When the message "Enter Network Key" appear enter the Code we
send to you

-----------

How to enter my Unlock Code on BENQ?

Model : All Benq

1 - Switch ON your phone with a not allowed SIM
Card,
2 - Enter the Unlock Code we send to you.

------------



How to enter my Unlock Code on Bosch?

Model : All Bosch

1 - Switch on your phone with a not allowed SIM
Card,
2 - When the message "Enter Network Key" appear enter the Code we
send to you.

----------

How to enter my Unlock Code on Ericsson?

Model : All Ericsson

1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.

----------

How to enter my Unlock Code on Kenwood ?

Model : All Kenwood

1 - Switch ON your phone with a not Accepted SIM
Card,
2 - Enter the Unlock Code we send to you.

----------

How to enter my Unlock Code on LG Electronics ?

Model : LG KU990 Viewty

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.


Model : LG TU720 CU720 And All Shine SERIES

1) Power ON your phone with an accepted SIM card
2) Type *#865625#UNLOCK CODE
3) Press OK
4) Device is now unlocked


Model : LG CU400

1 - Insert SIM Card from a unsupported network
provider,
2 - Power on the handset,
3 - Phone will display "Invalid SmartChip"
4 - In Idle screen, enter : 159753#*#
5 - Phone will display "Enter NCK, Remaining 5"
6 - Enter the 8 digit SIM Unlock code
7 - Select "OK"
8 - The handset is now successfully unlocked


Model : CU515

1.Put a SP-locked sim in the phone, phone say
invalid smart chip
2.Now enter *#865625# then select option 1 and then again select 1 and enter
your 16 digits code
Phone will be unlocked!


Model : LG U8150

1 - Switch ON your phone with a NOT Allowed SIM
Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.


Model : LG U400

1. Insert the Accepted Sim Card.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with
only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code
comes with only 6 digits, add 00 in front of the 6 digit code.

6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you
will see a message Enter SP Lock. Enter SP Code.
10. Then press OK


Model : LG U450

1. Insert the Accepted Sim Card.
2. Enter 2945#*450#


Model : All other model

1 - Switch ON your phone with an Allowed SIM
Card,
2 - Then compose :

2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)

3 - Go to "Menu" and then to "Settings",
4 - Then select "Security",
5 - To finish select "Network Provider" and select
"Desactivate"
6 - Enter the Unlock Code we send to you.

Model : To Classify

For the next models u must to insert the original SIM:

LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter
NCK and press OK.

For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.

How to enter my Unlock Code on Mitsubishi ?

Model : Trium Mars
1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M341i

1 - Swith ON your phone with an Accepted SIM
Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M342i

1 - Swith ON your phone with an Accepted SIM
Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : All Mitsubishi

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

----------

How to enter my Unlock Code on Motorola ?

Model : All Motorola

1 - Switch ON your phone with a not allowed SIM
Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.

WARNING : If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody allready enter too many wrong codes, you just have
to let phone ON on theses errors messages and after 40 min to 2 hours maximum
the message "Enter Code Special" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the icon Phone
2 - Enter the following keys: ** 057 *
3 - Mobile displays "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.

-----------

How to enter my Unlock Code on NEC ?

Model : Nec N342i

1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.

Model : All others NEC

1 - Switch ON your phone without SIM Card,
2 - Compose : #7320*CODE#.

Model : old NEC

1 - Switch ON your phone without SIM Card,
2 - Compose : #3210*CODE# and press Call Button.

--------------

How to enter my Unlock Code on Nokia ?

Model : All Nokia

1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#

The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )

3 - The phone show "SIM Restriction Off" and was unlocked !

--------------

How to enter my Unlock Code on Panasonic ?

Model : Panasonic GD67/68 & GD87/88 & x70 & P341i

1 - Switch ON your phone without SIM Card,
2 - Compose : 746 and press 2 times the button "OK",
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.

Mode : Panasonic G60

1 - Switch ON your Phone with a not allowed
Accepted SIM Card
2 - Enter your PIN Code and Confirm
3 - Press a second time on OK button
4 - The phone now ask for Unlock Code !

Model : Panasonic GD50 & GD55

1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.

Model : Panasonic X60 & X400

1 - Switch ON your phone with an Accepted SIM
Card,
2 - Compose : 52824**,
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.

or

1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - Compose : 746 and press 2 times the button "OK",
4 - A new menu will appear, select "NCK",
5 - You can now enter the Unlock Code we send to you.

Model : Panasonic X100

1 - Switch ON your phone with an Accepted SIM
Card,
2 - Compose : #*7465625*638*CODE#

-----------

How to enter my Unlock Code on Philips ?

Model : All Philips

1 - Switch ON your phone with a not Accepted SIM
Card,
2 - Phone ask for "Enter NCK",
3 - You can now enter the Unlock Code we send to you.



How to enter my Unlock Code on Pantech ?

1 - Insert non-accepted SIM card
2 - Power on the device
3 - The display will show "Change SIM" and Left Soft Key will be
labeled "Unlock"
4 - Press Left Soft Key - A "Password" box will appear on display
5 - Enter Unlock Code
6 - Press "OK" - Center Soft Key
The device will display "rebooting" and then power cycle
7 - The device is now unlocked



Pantech C150


Insert accepted sim card in the phone
and type in
*#865625#
-then will ask for ur pass key to unlock
-retype pass key
-DONE.
------------

How to enter my Unlock Code on Sagem ?

Model : Sagem My-S7

1 - Switch ON your phone without SIM Card,
2 - Compose : *#*#CODE# and press "Call" button.

Model : All Sagem

1 - Switch ON your phone with a not Allowed SIM
Card,
2 - Phone will show "SIM VERROU"
3 - You can now enter the Unlock Code we send to you.

WARNING : if your mobile show "CODE POSTE" it's because you have a
Security Code, can be 0000 or 1234 but we can't calculate this code with your
IMEI because it's not code from Phone but code from the User of the Phone !

----------

How to enter my Unlock Code on Samsung ?

Model : Samsung Z105 & Z107

1 - Switch ON your phone with a not Accepted SIM
Card,
2 - Compose : #7465625*638*CODE#

Model : All others Samsung

1 - Switch ON your phone with a not Accepted SIM
Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.

OR (if phone show "Insert Correct SIM Card")

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#




BlackJack i607 (Cingular
blackjack )
Insert disallowed simcard (a simcard that the
phone does not usaully accept) and enter unlock codes when prompted

NOTE: If you are unable to connect to service provider or unable to make out
going calls or recieve messages, this has nothing to do with your phone being
locked or not, you need to force the BlackJack to change to GSM mode, this can
be done as follows:

Power on your Phone

1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM

This should resolve your problem.

-----------

How to enter my Unlock Code on Sanyo ?

Model : All Sanyo

1 - Switch ON your phone with a not Allowed SIM
Card,
2 - Enter the Unlock Code we send to you.

-----------

How to enter my Unlock Code on Sendo ?

Model : All Sendo

1 - Switch ON your phone with a not allowed SIM
Card,
2 - Message "Enter NCK" will appear,
3 - You can now enter the Unlock Code we send to you.

----------

How to enter my Unlock Code on Sharp ?

Model : All Sharp

1 - From front screen type *01763*6371#
2 - The handset will reset back to the main screen
3 - Press M button.
4 - Scroll to Settings and press SELECT.
5 - Scroll to Security and press SELECT.
6 - Scroll to MEP locks and press SELECT.
7 - Enter your Handset Code (the default code is 0000) and press OK.
8 - Scroll to Network and press SELECT.
9 - Scroll to Deactivate and press SELECT.
10 - Enter Unlock Code we send to you and press OK.
11 - Handset should then display DONE and be unlocked.

---------

How to enter my Unlock Code on Siemens ?

Model : All Siemens

1 - Switch ON your phone with a not Allowed SIM
Card,
2 - Compose : *#0000*CODE#

or

1 - Switch ON your phone with a not Allowed SIM Card,
2 - Compose : *#0001*CODE#

----------

How to enter my Unlock Code on Sony?

Model : All Sony

1 - Switch ON your phone without SIM Card,
2 - Compose : *#7465625*12*CODE#.

-----------

How to enter my Unlock Code on Toshiba ?

Model : All Toshiba

1 - Switch ON your phone with a not Accepted SIM
Card,
2 - Enter the Unlock Code we send to you.

OR

1. Insert Non Vodafone SIM into the handset and power on.
2. The display will show Enter Network Unlock Code.
3. Enter **00012* then 47369761 followed by #, then press the centre menu key.
4. The display will now show Done.
5. Switch the phone off and on. The phone will now be unlocked

TS803 :

1. Insert Non Vodafone SIM into the handset
and power on.
2. The display will show SIM Error. This SIM card cannot be used
3. Press the centre menu key for 3-4 seconds. The display will show Enter Code
4. Enter unlock code
5. The handset will then reboot itself. Once completed, the handset will be
unlocked

----------

How to enter my Unlock Code on Trium ?

Model : Trium Mars

1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M341i

1 - Swith ON your phone with an Accepted SIM
Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M342i

1 - Swith ON your phone with an Accepted SIM
Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : All Mitsubishi

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

----------

How to enter my Unlock Code on SonyEricsson ?

Model : All SonyEricsson

1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.

If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must
press "down arrow"
instead of "left arrow" for step 2 & 3. We mean by "Down
Arrow" to direct the Jogdial down !

-----------

How to enter my Unlock Code on Vitel ?

Model : All Vitel

1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code we send to you.

Model: TSM7
1 - Switch ON your phone without SIM Card,
2 - Enter the Code ##**9987,
3 - The phone now ask for Unlock Code.

---------

How to enter my Unlock Code on VK Mobile ?

Model : VK530

1 - Switch the handset ON without SIM Card - screen will display Insert Card.
2 - Compose : *#83*737# (press and hold # for 1 sec) - this will give access to
the personalisation menu
3 - Select Disable Personalisation
4 - Type Unlock Code we send to you and press the ok button
5 - Handset should now be unlocked

----------

How to enter my Unlock Code on Wonu ?

Model : All Wonu

1 - Switch ON your phone with a not Allowed SIM
Card,
2 - Enter the Unlock Code we send to you

----------

How to enter my Unlock Code on SPV ?

Model : All SPV

1 - Switch ON mobile with a not Allowed SIM
Card,
2 - Enter Unlock Code we send to you.

Model : SPV C500

1 - Switch ON mobile with a not Allowed SIM
Card,
2 - The message "PUK2" appear,
3 - Enter the Unlock Code we send to you.
4 - Phone ASK for New Code PIN enter : 0000
5 - Confirm and compose : 0000**
6 - Click "Finish" and phone will show "Network is
locked..."
7 - Enter the Unlock Code we send to you and click "Finish"
8 - Restart the Mobile who is Unlocked !

How to enter my Unlock Code on Sidekick or Hiptop ?

1 - Power ON your phone with different SIM Card then the phone is locked to
2 - The phone will prompt for unlock code
3 - Enter UNLOCK CODE
4 - Device is now unlocked

How to enter my Unlock Code on Alcatel?

Model : Method Generic

1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.

Model : 531 & 535

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.

Model : All other Alcatel

1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you

How to enter my Unlock Code on BENQ?

Model : All Benq

1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code we send to you.

How to enter my Unlock Code on BlackBerry?
Model : BlackBerry 8700

Go to the Menu -> Options -> Advanced Options -> Sim card
press select, while holding the Shift key (bottom right corner CAPS),
type mepd. You should now see the five locking categories listed, while
holding the alt key, type mep2. Release the alt key. You are now
prompted to enter the Network MEP code. Enter the code, enter
Return/Enter, the device should then be unlocked.

Model : BlackBerry 8800

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard
(NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code".
Type in the 16 digit unlock code received from UnlockBase.com and press
in the track wheel / jog dial to confirm
6 - Your phone is now unlocked

Model : BlackBerry 8100 Pearl

1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.

Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from
only using SIM cards from Vodafone Australia. In case of difficulties,
please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is “Invalid SIM card”. (Different message? See FAQ below)

6. Select “Turn Wireless Off”

7. Select “Settings” Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with “Enter Network MEP code (255 left)” on the
screen, enter the 16-digit network unlock code provided for your phone,
then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically.
This will be confirmed if you can make and receive calls with the
Non-Vodafone Australia SIM card. (You will need reception and phone
credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock
the device will be delayed for 10 seconds increments. The number of
unlocking attempts is limited to 255 tries only. When 255 attempts is
reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No
outgoing calls including emergency call is possible when the phone is
blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a
PIN. This is not the unlocking code that has just been provided. For
information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card
please read the manual that came with your phone. This is not a handset
unlocking difficulty.

Question: My handset displays a different message then what is shown in
this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is “Invalid SIM
card”. Because each handset may have a different variation in software
there is no common message. If your handset displays a different
message it is recommended to move onto the next step. Note: Faulty SIM
Cards - The handset may also display messages indicating the SIM you
are using to unlock the handset is faulty, it could display “Insert
SIM” “Bad Card”, “Card Error” or “Card Rejected”, confirm the SIM card
is inserted correctly – Gold area downwards and the cut of the corner
matches correctly. You will need a working Non Vodafone SIM card to
unlock the handset, Vodafone can not assists with other networks faulty
SIMs.

Question: I am outside of Australia and experiencing difficulties
unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.

--------------------

Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked